Ajax alarm hub and PoE switch neatly installed in a structured wiring panel

    Intrusion & environmental detection

    Alarm System Installation in Waterloo Region

    Get a security quote

    An alarm should tell you which protected opening or space needs attention without making everyday use a nuisance. We install alarm systems across Waterloo Region, starting with entrances, occupancy and the people who will arm and disarm. Ajax Systems wireless alarms are our main platform. Alarm.com is an option where a client prefers its connected service and compatible hardware. We also assess existing systems before assuming the panel, wiring and every sensor need replacing. Installation, phone alerts and professional monitoring are separate choices, and we explain them that way.

    Ajax Systems wireless alarm installation

    Wireless detection can be useful in a finished home or office where pulling cable to every opening would be disruptive. It still needs proper design. We check the hub position, device communication, power and the connection used for alerts or monitoring. The layout must work through the building materials and actual distances, not just on a floor plan. A device list is not a coverage plan: we identify which door, route or room each sensor is meant to protect. Battery maintenance remains part of owning a wireless system. At handover we explain warnings and checks so an unnoticed maintenance issue does not become a reason to stop using the alarm.

    Learn about Ajax Systems equipment

    Door, glass-break and motion sensors have different jobs

    A door contact reports when that selected opening changes state. Glass-break detection is designed for particular sound conditions; placement and the room matter. Motion sensors cover movement within a defined view, not every room behind the wall. We look at entry doors, garage access, patio openings, lower levels and any separate occupied area before deciding which layers fit. Pets, furniture, heating sources and everyday movement influence device selection and positioning. A night mode may protect the perimeter while leaving occupied rooms usable. Entry delays belong on the routes people actually use; less-used openings may need a different response. We show the chosen routine to the users rather than handing over a system everyone has to bypass.

    Water leak, smoke, heat and low-temperature detection

    Security planning can include environmental warnings as well as intrusion. Compatible water-leak sensors can be placed near vulnerable plumbing or appliances; one detector does not cover every pipe in a building. Smoke and heat detection need to suit the location and the selected system. Low-temperature detection can help flag a heating problem in a space that is not checked regularly. We confirm which devices, alerts and monitoring signals the proposed equipment supports instead of implying every panel handles everything. Alarm-connected detection does not remove the need to meet applicable life-safety requirements. Tell us about mechanical spaces, unattended areas and existing detection during the visit so the scope and responsibilities are clear.

    Alarm.com when its connected service fits

    Some clients prefer Alarm.com because they already know the app or want supported connected services on compatible equipment. We assess the panel and communicator first, then identify the service features actually needed. Remote arming, user management and notifications depend on the equipment, connectivity and active service arrangement. Cameras or other connected devices should be added because they serve the plan, not because an app can display them. We explain the differences between an Alarm.com-connected system and an Ajax installation in plain language. You should know what continues locally, what relies on an external connection and what changes if you choose a different monitoring arrangement later.

    Explore Alarm.com monitoring

    Monitoring options and the response plan

    A local siren can attract attention, while an app notification relies on an authorised person seeing it. Professional monitoring adds a separate procedure for eligible signals when you cannot respond yourself. We review the contacts, covered events and communication path before activation. Neither an app nor monitoring guarantees emergency arrival at a particular time. Keep phone numbers and responsibilities current, and arrange appropriate system tests. Monitoring with us has no long-term contract; you own the equipment and can cancel monitoring anytime. Changes can be made through our self-serve portal or by speaking with a real local person. The response arrangement should match how the property is occupied, not a generic assumption about who is always available.

    Compare alerts and monitoring

    Taking over an older alarm system

    Before replacing an inherited panel, we identify the devices and test what can be reused. Existing wiring or contacts may still have value even if a communicator is obsolete. Account control, ownership and the current provider's agreement matter as much as the brand on the keypad. We keep older parts to continue servicing older systems where compatible stock is available, and proactively contact clients about end-of-life issues. Our work ahead of the 3G network shutdown is an example of planning before a communication change becomes a failure. Do not cancel the old monitoring until dates and testing are agreed. We document the retained equipment and explain any transition gap rather than promising every system transfers unchanged.

    Plan an alarm-provider switch

    Installation, testing and everyday use

    During the site walk, show us the doors people use, where pets move and which spaces remain occupied when other areas are armed. We turn that information into a device schedule and a quote. Our own employees install and test the selected equipment. We check the intended entry delays, arming modes, sensor events, authorised users and communication, then practise the normal routine with you. If outdoor approaches or vehicles are a concern, active deterrence can be scoped separately alongside camera views. A renovation or new work area may change coverage later; keeping the original schedule makes that review easier.

    Consider outdoor active deterrence
    Ajax touchscreen keypad installed at an entry door
    Ajax touchscreen keypad installed at an entry door
    Ajax door contact sensor on a window frame
    Ajax door contact sensor on a window frame

    Common questions

    Is Ajax Systems your main alarm platform?

    Yes. Ajax Systems wireless alarms are our main platform. We also offer Alarm.com where a client prefers it and assess the building before selecting equipment.

    Can you cover leaks and low temperature?

    Compatible sensors can report configured environmental conditions. We confirm device placement, connectivity and which monitoring signals are supported for your system.

    Do I need professional monitoring?

    It is a separate choice from installation. We explain self-managed alerts and the available monitored response procedure so you can choose deliberately.

    Can an older wired alarm stay?

    Possibly. We inspect the panel, sensors, wiring and accounts first. Reuse depends on condition and compatibility, not age alone.

    Can I cancel monitoring?

    Yes. There are no long-term contracts and you own your equipment. Clients can cancel monitoring anytime.

    Why Slinger

    Local, family owned, since 2007

    We are locally and family owned in Waterloo. Our own employees install and service your system: no subcontractors, no 1-800 number. You can call a real local person who can discuss the equipment and the next step with you.

    Your equipment. Your decision.

    There are no long-term contracts. Clients own their equipment and can cancel monitoring anytime. Installation and monitoring are separate choices; we explain what each does before you decide how your property should be protected.

    Planning ahead for older systems

    We proactively watch client systems and contact clients ahead of end-of-life issues. We reached out before the 3G network shutdown so clients could plan their next step. We also keep a stock of older parts to keep servicing older systems where compatible parts are available.

    Online control, local help

    Our self-serve online portal lets clients make monitoring changes. If you prefer a conversation, call a real local person. Keeping contact details current matters when the people responsible for responding to an alarm change.

    Active deterrence is a specialty

    We use perimeter beams, outdoor motion detectors and cameras tied to strobe sirens to try to scare intruders off before they reach the house. Detection routes, schedules and placement are designed around the property; we do not promise that any system will prevent every incident.

    Google reviews

    What our clients say

    Loading Google reviews…

    A security plan built around your property.

    Start with a conversation about the spaces that matter.

    Get a security quote